Voltar ao blog
Guias Práticos 2026-11-13 Healthy Horizons Breastfeeding Centers, Inc. 9 visualizações

Como substituir o tubo da Medela Pump In Style e manter a sucção forte

Como substituir o tubo da Medela Pump In Style e manter a sucção forte

Saiba quando substituir os tubos da Medela Pump In Style, como colocar um par novo e como detetar os problemas de sucção que os tubos novos podem resolver.

Start with the tubing if suction feels weaker

When your Pump In Style Advanced starts pulling less milk or feels less effective, the tubing is one of the first parts to check. Tubing carries vacuum from the pump to the breast shield, so worn or damaged tubing can weaken the suction you feel. Replacing it is a quick maintenance step you can do at home, and it is also worth keeping a spare pair on hand so a worn tube never interrupts your pumping routine.

This guide covers how to tell when tubing needs replacing, how to swap in a new pair, and what to check if suction still feels off afterward.

The replacement part that fits your pump

  • Medela Pump In Style Advanced Breast Pump Tubing Pair: Medela Pump In Style Advanced Breast Pump Tubing Pair comes with one set of two tubes, and Medela states these replacement tubes are tested and designed to work with your Pump In Style Advanced Breast Pump. Using tubing that is designed for your exact pump model helps you avoid fit problems that can affect suction.
    Medela Pump In Style Advanced Breast Pump Tubing Pair
    Medela Pump In Style Advanced Breast Pump Tubing Pair
  • Medela Pump In Style Advanced Breast Pump Tubing Pair: The tubing works with all Medela Pump In Style Advanced Breast Pumps, including the Advanced Starter Set and Advanced Personal Double Breast Pumps. You can order with confidence if you own any version of the Pump In Style Advanced.

Signs it is time to replace your tubing

Tubing is a wear item, and Medela describes its replacement tubing as a spare or a replacement for worn or damaged tubing. Check your tubes regularly for these issues:

  • Visible cracks, splits, or pinholes: Any break in the tube lets air escape and reduces the vacuum reaching your breast shield.
  • Loose or stretched ends: If the tubing no longer grips the pump or shield connector snugly, suction can leak at the connection.
  • Moisture or condensation inside the tube: Moisture can interfere with airflow. If you see it, replace the tubing rather than trying to dry and reuse it.
  • Suction that feels weaker than usual: If you have already checked the rest of your setup, worn tubing is a common culprit for a weak suction breast pump fix.

How to change breast pump tubing on a Pump In Style Advanced

The replacement is straightforward. Work with clean hands and have your new Medela tubing pair ready.

  1. Turn off and unplug the pump: Always disconnect power before handling tubing or pump parts.
  2. Detach the old tubing: Gently pull the tubing off the pump outlet and away from the breast shield or connector. Do not pull by the tube itself if it is stuck; twist slightly to loosen.
  3. Inspect the new tubing: Check that both tubes in the pair are free of cracks or moisture before installing.
  4. Connect the new tubing: Push one end firmly onto the pump outlet and the other onto the breast shield or connector. Repeat for the second tube if your setup uses two.
  5. Test the suction: Turn the pump back on and run it briefly to confirm you feel suction at the breast shield. If suction is still weak, check the other parts listed below.

When new tubing will not fix weak suction

Tubing is only one part of the suction path. If you have replaced the tubing and suction still feels weak, the cause may be elsewhere. Check that the breast shield is seated correctly, that the valve and membrane are clean and undamaged, and that all connections are snug. The supplied information for this tubing does not include a full troubleshooting guide for the pump itself, so if problems persist after checking these basics, consult your pump's manual or a lactation professional.

Breast pump maintenance tips to protect your tubing

A little routine care helps tubing last longer and keeps suction reliable.

  • Keep moisture out of the tubes: After pumping, check that no milk or condensation has entered the tubing. If moisture appears, replace the tubing rather than continuing to use it.
  • Store tubing loosely: Avoid coiling it tightly or pressing heavy items on top, which can create cracks over time.
  • Inspect before each pumping session: A quick look for cracks or loose connections takes seconds and can prevent a session with weak suction.
  • Keep a spare pair on hand: The Medela tubing pair comes with two tubes, so you can replace both at once or keep one as a backup.

Artigos relacionados

Customer Service
Início
Produtos
Carrinho
Perfil